top of page

BLINCYTO (IV)

Blinatumomab

**ALWAYS establish patent IV access and flush PRIOR to mixing medication**


Pharmacy specific orders / instructions always supersede the Agency guidance provided below. If in doubt, do not guess, call our office, or tag @TeamHelp-CareCoordination and ask for Clinical Support.



ALWAYS establish IV access prior to mixing any meds

ALWAYS make sure you have everything you need to complete infusion before you begin

ALWAYS confirm your medication dose against the medication label and orders

ALWAYS reach out to us first (not the Pharmacy) with any questions

NEVER tell a Pt you have not given a particular medication before




MIXING

  1. Obtain a clear/clean space.

  2. Be sure all the necessary supplies are available to complete infusion from beginning to end.  You may need port access supplies port if port is not already accessed or needle needs to be changed , and pump tubing if using a pump.

  3. Blincyto comes pre-mixed in an infusion bag from the Pharmacy. The bag will need to be changed in accordance with the orders, typically q48hrs, but orders will dictate.

  4. It is important to note that the Blincyto infusion should run continuously with minimal interruption.

  5. A single cycle of treatment of Blincyto induction or consolidation consists of 28 days of continuous intravenous infusion followed by a 14-day treatment-free interval (42 days total). It is important to know where the patient is in the cycle.



ADMINISTRATION

  1. Infuse Blincyto solution according to the instructions on the pharmacy label on the prepared bag at one of the following constant infusion rates:

    • Infusion rate of 10 mL/hour for a duration of 24 hours

    • Infusion rate of 5 mL/hour for a duration of 48 hours

    • Infusion rate of 0.6 mL/hour for a duration of 7 days*

    **The Pharmacy will send a pre-programmed pump with the correct rate. The RN should review the program to ensure sure it matches the medication order and label.

  2. The BLINCYTO® solution must be administered using IV tubing that contains a sterile, nonpyrogenic, low protein-binding, 0.2 micron in-line filter

IMPORTANT NOTE: Do not flush the Blincyto infusion line or intravenous catheter, especially when changing infusion bags. Flushing when changing bags or at completion of infusion can result in excess dosage and complications thereof.  When administering via a multi-lumen venous catheter, BLINCYTO® should be infused through a dedicated lumen.

ADDITIONAL INFO

Medication Guide: PDF Download

Administration Guide: Website

 

 

© 2018-2023 by Helms Home Care

 

300 N NC 16 Business Hwy

Denver NC 28037

704-802-9625 (P)

888-502-5390 (F)
service@helmshomecare.com

​

​

​

​

bottom of page