GLASSIA (IV)

ALWAYS establish patent IV access and flush PRIOR to mixing medication

ALWAYS establish IV access prior to mixing any meds

ALWAYS make sure you have everything you need to complete infusion before you begin

ALWAYS confirm your medication dose against the medication label and orders

ALWAYS reach out to us first (not the Pharmacy) with any questions

NEVER tell a Pt you have not given a particular medication before

Obtain a clear/clean space to prepare the Glassia.
Be sure all the necessary supplies are available to complete the procedure from beginning to end.
- You will need syringes, needles and alcohol to prepare medication.
Inspect vials for particulate material and discoloration prior to dilution. It should appear colorless to slightly yellow. Allow solution to warm to room temperature.
Select appropriate number of vials required to prepare the dose.
- There is usually a +/-15% deviation allowed for dosing so the total volume should fall within 15% of the dose.
Draw up the Glassia from vial(s) to get the ordered dose.
Add Glassia to empty IV bag using a syringe and needle to inject the medication into the bag. Or Glassia may be administered directly from the vials using a vented spike.

Take baseline vitals and document basic assessment.
Spike the bag of Glassia & prime line.
Infuse over a minimum of 15 minutes. Dial-a-flow tubing is most often used to infuse.
Monitor patient for any infusion reactions.
Record lot numbers and expiration dates for vials used.
Record vitals every 15 minutes after infusion start AND 5-10 minutes post infusion.
Disconnect patient, flush line, and remove IV.
- Place pressure bandage at site.
Clean and dispose of used supplies.

Website: GLASSIA

Administration: Dosage and Administration